Ir para o conteúdo principal

Alterações no passo nº 18

Edição por Clay Eickemeyer

Edição aprovada por Clay Eickemeyer

Antes
Depois
Sem alteração

Linhas do passo

-[* black] To help the adhesive bond, apply heat to the edges of the rear glass using an [guide|11677|iOpener|new_window=true], [guide|157348|hair dryer|new_window=true], or [guide|151116|heat gun|new_window=true] until its hot to the touch.
+[* black] To help the adhesive bond, apply heat to the edges of the rear glass using an [guide|11677|iOpener|new_window=true], [guide|157348|hair dryer|new_window=true], or [guide|151116|heat gun|new_window=true] until it's hot to the touch.
[* black] Firmly press around the perimeter of the rear glass.
[* black] If you have [guide|142291|screen vise clamps], use them to strengthen the bond of your new adhesive. If not, keep reading for more ways to secure the rear glass.