Conserte seus objetos Comunidade Loja

Alterações no passo nº 17

Edição por Clay Eickemeyer —

Edição aprovada por Clay Eickemeyer

Antes
Depois
Sem alteração

Linhas do passo

[title] Install the rear glass
-[* icon_note] If any clips on the rear glass are bent, gently straighten them with your fingers. Make sure the gaskets on the bottom two screw tabs are in good condition.
-[* black] Grab the rear glass and align it over the frame.
+[* icon_note] If any clips on the rear glass are bent, gently straighten them with your fingers.
+[* black] Hold the rear glass and align it over the frame.
[* black] Lay the top edge of the rear glass straight down onto the frame until the top clips engage.
[* black] Press around the perimeter of the rear glass to engage the remaining clips.