Conserte seus objetos Comunidade Loja

Alterações no passo nº 14

Edição por Clay Eickemeyer —

Edição aprovada por Clay Eickemeyer

Antes
Depois
Sem alteração

Linhas do passo

[title] Connect the battery
[* black] Use the flat end of your spudger or your finger to reconnect the battery.
-[* black] Hook the top edge of the battery connector cover onto its [link|https://guide-images.cdn.ifixit.com/igi/nrwJQTOm6vQQRrZh.huge|slot above the connectors|new_window=true] and align the cover with its screw posts in the frame.
-[* black] Use your tri-point Y000 driver to install the two 1.3 mm screws.
+[* black] Hook the battery connector cover onto its slot on the logic board.
+[* black] Use your tri-point Y000 driver to install the screws and secure the cover.
[* black] Power on your iPhone and test it to make sure everything works before sealing it up. Power it back down before finishing this repair.