Alterações no passo nº 14
Edição por Clay Eickemeyer —
Edição aprovada por Clay Eickemeyer
- Antes
- Depois
- Sem alteração
Linhas do passo
| [title] Connect the battery | |
| [* black] Use the flat end of your spudger or your finger to reconnect the battery. | |
| [* red] Hook the top edge of the battery connector cover onto its [link|https://guide-images.cdn.ifixit.com/igi/nrwJQTOm6vQQRrZh.huge|slot above the connectors|new_window=true]. | |
| [* black] Lay the cover over its connectors and line up the holes with their screw posts in the frame. | |
| - | [* black] Use your tri-point Y000 driver to install the two 1.3 mm screws |
| + | [* black] Use your tri-point Y000 driver to install the two 1.3 mm screws. |