Conserte seus objetos Comunidade Loja

Alterações no passo nº 13

Edição por Clay Eickemeyer —

Edição aprovada por Clay Eickemeyer

Antes
Depois
Sem alteração

Linhas do passo

-[* red] Hook the bottom edge of the charging coil connector cover onto its [link|https://guide-images.cdn.ifixit.com/igi/LRHFT2co6ECh1eub.huge|slots below the connectors|new_window=true] and align the cover with its screw post in the frame.
+[* black] Hook the bottom edge of the charging coil connector cover onto its [link|https://guide-images.cdn.ifixit.com/igi/LRHFT2co6ECh1eub.huge|slots below the connectors|new_window=true] and align the cover with its screw post in the frame.
[* black] Use your tri-point Y000 driver to install the 1.0 mm screw.