Alterações no passo nº 13
Edição por Clay Eickemeyer —
Edição aprovada por Clay Eickemeyer
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* red] Hook the bottom edge of the charging coil connector cover onto its [link|https://guide-images.cdn.ifixit.com/igi/LRHFT2co6ECh1eub.huge|slots below the connectors|new_window=true]. | |
| [* black] Lay the cover over its connectors and line up the hole with its screw post in the frame. | |
| - | [* black] Use your tri-point Y000 driver to install the 1.0 mm screw |
| + | [* black] Use your tri-point Y000 driver to install the 1.0 mm screw. |