Alterações no passo nº 1
Edição por Clay Eickemeyer —
Edição aprovada por Clay Eickemeyer
- Antes
- Depois
- Sem alteração
Linhas do passo
| [title] Remove the leftover adhesive | |
| [* icon_note] The leftover adhesive on your frame resists peeling and leaves residue. If the adhesive feels stubborn, apply a low amount of heat using a [guide|157348|hair dryer|new_window=true] or [guide|151116|heat gun|new_window=true]. | |
| [* black] Use either end of a spudger to press and roll the adhesive off the frame. | |
| [* black] Use blunt nose tweezers or your fingers to remove loose pieces of adhesive. | |
| - | [* black] Repeat this process around the entire perimeter of the frame. |
| - | [* icon_note] While the adhesive should stick to the frame, make sure to clean the rear glass if any residue remains. |