Alterações no passo nº 5
Edição por Jad Abdalnor —
Edição aprovada por Jad Abdalnor
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Put the board back in place and place the first screw as shown in the first image. |
|---|---|
| - | [* black] Place the second screw as shown in the second image. |
| + | [* black] Put the board back in place and place the first screw (1.2 mm Phillips) as shown in the first image. |
| + | [* black] Place the second screw (1.2 mm Phillips) as shown in the second image. |
| [* black] Carefully place the two halves of the clock back together and put all 4 screws (1.2 mm Phillips) as shown in the third image. | |
| [* black] Open the back lid and place the batteries. |