Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #1

Edição por Evan Noronha

Edição aprovada por Evan Noronha

Antes
Depois
Sem alteração

Linhas de Passo

[* red] Remove the two 4.3 mm T5 Torx screws securing the iSight camera board to the top of the rear enclosure.
[* icon_noteicon_reminder] During reassembly, be careful '''not''' to over-tighten these screws. They have large shoulders and will not hold the camera board tightly against the rear enclosure.
[* red] Remove the two 4.3 mm T5 Torx screws securing the iSight camera board to the top of the rear enclosure.
[* icon_noteicon_reminder] During reassembly, be careful '''not''' to over-tighten these screws. They have large shoulders and will not hold the camera board tightly against the rear enclosure.