Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #1

Edição por Walter Galan

Edição aprovada por Walter Galan

Antes
Depois
Sem alteração

Linhas de Passo

[* red] Remove the two 4.3 mm T5 screws securing the iSight camera board to the top of the rear case.
[*
enclosure.
[*
icon_note] When reinstalling, be careful not to over-tighten these screws. They have large shoulders and will not hold the camera board tightly against the rear caseenclosure.
[* red] Remove the two 4.3 mm T5 screws securing the iSight camera board to the top of the rear case.
[*
enclosure.
[*
icon_note] When reinstalling, be careful not to over-tighten these screws. They have large shoulders and will not hold the camera board tightly against the rear caseenclosure.