Ir para o conteúdo principal

Alterações no passo #4

Edição por robbieford2000

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

-[* black] Remove the metal piece from the drive.
+[* black] Detach the metal piece from where it is attached to the body underneath the rubber pieces that were just removed.
+[* black] The side of the piece that is closest to the door opening should now be loose. The whole piece should now needs to be slid farther into the drive through the slots.
+[* black] Once you get the piece to the back of the slots the side that is still attached can be pried towards the center of the drive on each side to remove it from the slots on the door and hence the PSP.