Alterações neste passo
Edição por Dominik Szwec —
Edição aprovada por Dominik Szwec
- Antes
- Depois
- Sem alteração
Linhas do passo
| + | [* black] Make sure the backplate aligns well with the front plate. Never force it to close, if it doesn't check for any cables sticking out |
|---|---|
| [* black] Finish by screwing the backplate back on, which is held together by 6 screws. | |
| - | [* black] Using the |
| + | [* black] Using the Triwing screwdriver, twist clockwise to screw each screw in. |