Alterações neste passo
Edição por Dominik Szwec —
Edição aprovada por Dominik Szwec
- Antes
- Depois
- Sem alteração
Linhas do passo
| + | [* black] Align the battery and it's housing with the 3 holes on the main board circled in red |
|---|---|
| [* black] Screw back the 3 screws holding battery and its housing. | |
| [* black] Using the Philips screwdriver, twist clockwise to screw each screw in. | |
| - | [* black] Connect the battery cable back to the main board. |
| - | [* black] Do so carefully with your tweezers. |