Alterações neste passo
Edição por Dominik Szwec —
Edição aprovada por Dominik Szwec
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Place the SL, SR, and sync buttons into the new charging rail | |
| [* black] Using tweezers, carefully insert the buttons and screw on the PCB using 2 Philips 3mm gold screws. | |
| + | [* icon_note] The SL and SR buttons have different bits of plastic sticking out, and the charging rail has ones that match, be sure to match them up, as to not place the buttons in the wrong spots. |