Histórico do passo nº 5 do guia Left Nintendo Switch NES Controller Charging Rail Replacement

Alterações no passo nº 5

Edição por Sarah Westberg — 2 de jun de 2023

Edição aprovada por Sarah Westberg

-	[* red] ~~Unscrew the PCB (printed~~ ~~circuit board)~~ from the rail. ~~Remove both screws.~~
-	[* black] ~~Using~~ the ~~Philips screwdriver,~~ ~~twist counterclockwise to unscrew each 3 mm gold screw~~.
+	[* red] Use a Phillips #000 screwdriver to remove two 3.0 mm screws from the rail PCB.
+	[* black] Remove the charging rail PCB.