Alterações no passo nº 3
Edição por Sarah Westberg —
Edição aprovada por Sarah Westberg
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* blue] Disconnect the 2 ribbon cables from the main board. |
|---|---|
| - | [* icon_caution] Do so carefully with tweezers so as to not tear the cables. |
| - | [* icon_note] The left, beige one has the clasp on the end on the connector, while the right, black one has it on the same side as where the ribbon cable comes in |
| + | [* blue] Use the tip of a spudger or your fingernail to flip up the small locking flaps on the two [guide|25629|ZIF Connectors|stepid=64969|new_window=true]. Then, you can safely pull the cable out. |
| + | [* icon_caution] Be sure to pry up on the hinged flap, not the connector socket. |