Alterações no passo nº 2
Edição por FarmYard Gaming —
Edição aprovada por FarmYard Gaming
- Antes
- Depois
- Sem alteração
Linhas do passo
| + | [title] Unscrew the battery housing |
|---|---|
| [* red] Use a Phillips #000 to remove three 3.0 mm screws holding the battery and it's housing. | |
| [* black] Remove the battery housing with the battery from the main board and set it aside. | |
| [* icon_caution] At this point the battery is still attached to the motherboard by a connector so don't pull it off the board. | |
| [* icon_note] If you're not replacing the battery, you can leave it attached to the board to complete the repair, just be careful when moving them so you don't damage the connection. |