Histórico do passo nº 1 do guia iMac Intel 27" EMC 2546 CPU Replacement

Alterações no passo nº 1

Edição por Walter Galan — 27 de jan de 2014

Edição aprovada por Walter Galan

	[* icon_note] The CPU will most likely be stuck to the heat sink with thermal compound.
	[* black] Insert the flat end of a spudger between the CPU and heat sink.
	[* black] Gently pry the CPU up by slightly twisting the spudger.
	[* black] Remove the CPU from the heat sink. Be careful not to touch the contacts.
	[* icon_reminder] To install a new CPU, see our [guide\|744\|thermal paste guide] for instructions on cleaning and preparing the thermal surfaces and applying a new layer of thermal compound onto the CPU and GPU dies.
+	[* icon_note] The GPU side has a gap between all memory chips and the cooler. Once you remove the cooler the thermal compound will break up leaving partial amounts on the cooler and memory contact points.