Alterações no passo nº 3
Edição por Adam O'Camb —
Edição aprovada por Adam O'Camb
- Antes
- Depois
- Sem alteração
Linhas do passo
| + | [* black] Before installing the heat sink, see our [guide|744|thermal paste guide|new_window=true] for instructions on cleaning and preparing the thermal surfaces and applying a new layer of thermal compound onto the CPU and GPU dies. |
|---|---|
| + | [* black] For the VRAM chips surrounding the GPU, install thermal pads or a thick thermal paste such as K5-PRO, rather than regular thermal paste. |
| + | [* icon_note] The above-mentioned "thermal surfaces" are as follows: |
| + | [* red] The CPU |
| + | [* orange] The GPU |
| + | [* yellow] The VRAM chips |
| + | [* green] The heat sink plates |
| + | [* icon_note] Note that the heat sink does not need new thermal paste. Clean it, but only apply thermal paste to the other surfaces. |
Imagem 1
Nenhuma imagem anterior
Adicionado