Pular para o conteúdo principal

Alterações no passo #4

Edição por lassedollerup

Edição aprovada por lassedollerup

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Under ConstructionUsing a heat gun, heat around the edges and seperate the glass from the front cover. Work from bottom up.
[* black] Please be patientNote the digitizer cable runs through a small hole behind the lcd, in the top of the phone.
[* black] When the glass is seperated, carefully lift the lcd a bit, to get the digitizer cable through the hole.
[* black] To protect the lcd from residue and fingerprints, cover it with masking tape, until you are ready to seal the glass to the cover.
[* black] When you have prepared new adhesive tape and the digitizer cable has been pulled through the hole to the backside of the phone.
[* black] Remove the masking tape from the lcd, and using some canned air, blow away dust and close the glass cover.
[* black] Finally reverse the disassembly and enjoy
.
[* black] Under ConstructionUsing a heat gun, heat around the edges and seperate the glass from the front cover. Work from bottom up.
[* black] Please be patientNote the digitizer cable runs through a small hole behind the lcd, in the top of the phone.
[* black] When the glass is seperated, carefully lift the lcd a bit, to get the digitizer cable through the hole.
[* black] To protect the lcd from residue and fingerprints, cover it with masking tape, until you are ready to seal the glass to the cover.
[* black] When you have prepared new adhesive tape and the digitizer cable has been pulled through the hole to the backside of the phone.
[* black] Remove the masking tape from the lcd, and using some canned air, blow away dust and close the glass cover.
[* black] Finally reverse the disassembly and enjoy
.

Imagem 1

Nenhuma imagem anterior

Adicionado

Imagem 2

Nenhuma imagem anterior

Adicionado