Alterações no passo nº 3
Edição por Clay Eickemeyer —
Edição aprovada por Clay Eickemeyer
- Antes
- Depois
- Sem alteração
Linhas do passo
| [title] Turn on your hair dryer | |
| [* black] Set the temperature of your hair dryer to its "hot" setting. | |
| - | [* icon_note] Even the hottest hair dryers will only reach up to 200 °F (93 °C). This is well-below the maximum temperature |
| + | [* icon_note] Even the hottest hair dryers will only reach up to 200 °F (93 °C). This is well-below the maximum temperature recommended for most electronics adhesives, so there is low risk of damaging or melting components. |
| [* black] Set the fan setting to "Low" for small parts, such as cables or tape. | |
| [* black] Set the fan setting to "High" for large surfaces, such as a screen or back cover. |