Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #4

Edição por Dan H

Edição recusada por Scott Havard

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Push the release on the back of the connector, then Pull the DC power cable straight out of its socket on the back of the logic board. ** You must release it, as it will not just pull out.
[* black] Push the release on the back of the connector, then Pull the DC power cable straight out of its socket on the back of the logic board. ** You must release it, as it will not just pull out.