Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos


Alterações neste passo

Edição por Dan H

Edição recusada por Scott Havard

Sem alteração

Linhas de Passo

[title] Blow Clean with Air and then Reassemble
[* black] Use a can of compressed air to blow the Mac clean before you re-assemble it. Be careful not to tip the can and blow wet material. A special anti-static vacuum can work well too, just don't use a standard vac.
[* black] Blow out all the vents along the bottom and the one behind the mac up above the power input as well. Cautiously blow around the Fan and Circuit Board/s until the unit is clean.
[* black] Free flowing vents are really important for proper cooling.