Pular para o conteúdo principal

Alterações no passo #2

Edição por Sam Goldheart

Edição aprovada por Sam Goldheart

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Unplug the left speaker cable from its socket on the logic board. Be sure to pull straight up out of the socket.
[* black] De-route the cable from the gap between the hard drive and logic board.
[* icon_note] If the gap between the hard drive and logic board is too smallnarrow for the speaker cable, disconnect it and leave itthe cable in place for now (after disconnecting from the logic board)place.
[* icon_note] If the gap between the hard drive and logic board is too smallnarrow for the speaker cable, disconnect it and leave itthe cable in place for now (after disconnecting from the logic board)place.