Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #21

Edição por Jeff Suovanen

Edição aprovada por Jeff Suovanen

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Lift the display up to a near-vertical position.
[* icon_note] At this point there is still a strip of adhesive along the bottom of the display, that will hold the display to the frame like a hinge. You can loosen this adhesive by working the display up and down a few times.
[* black] There are two strips left and right alongRemove as much of the bottom glue strip, where they reachadhesive as possible by grabbing it at the outer edges the last 20mm has no adhesive, effectively making right-angled lift-tabs, so you can remove these strips completely by carefullyedges, and then pulling them off from the outer endsor rolling toit towards the middle.
[* black] There are two strips left and right alongRemove as much of the bottom glue strip, where they reachadhesive as possible by grabbing it at the outer edges the last 20mm has no adhesive, effectively making right-angled lift-tabs, so you can remove these strips completely by carefullyedges, and then pulling them off from the outer endsor rolling toit towards the middle.