Skip to main content

Alterações no passo #17

Edição por Miroslav Djuric

Edição aprovada by Miroslav Djuric

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* icon_caution] Only lift the display a few inches—it is still attached to the iMac by data and power cables.
[* black] With the cards inserted as shown near the corners, gently twist the cards to increase the gap between display and case.
[* black] If there are any sections that seem to stick and won't separate, stop twisting and use one of the cards to cut the adhesive in the problem area.
[* black] Begin to lift the top of the display up from the frame.
[* icon_caution] Only lift the display a few inches—it is still attached to the iMac by data and power cables.