Skip to main content

Alterações no passo #17

Edição por Sam Goldheart

Edição aprovada by Sam Goldheart

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] With the cards inserted as shownshown near the corners, gently twist the cards together.
[* icon_note] This should slowly spread
to increase the gap between display and separate any remaining adhesivecase.
[* black] If there are any sections that seem to stick and won't separate, stop pryingtwisting and use a plastic card againone of the cards to cut the adhesiveadhesive in the problem area.
[* black] LiftBegin to lift the top of the display up from the frame.
[* icon_caution] The display is still attached to the iMac by data and power cables, do not attempt to separate it entirely.
[* black] With the cards inserted as shownshown near the corners, gently twist the cards together.
[* icon_note] This should slowly spread
to increase the gap between display and separate any remaining adhesivecase.
[* black] If there are any sections that seem to stick and won't separate, stop pryingtwisting and use a plastic card againone of the cards to cut the adhesiveadhesive in the problem area.
[* black] LiftBegin to lift the top of the display up from the frame.
[* icon_caution] The display is still attached to the iMac by data and power cables, do not attempt to separate it entirely.