Alterações no passo nº 2
Linhas do passo
| [* red] The next step is to remove both caps located at the end of the wire by using pliers. Unfold the metal in the caps using the pliers to release the exposed wire. | |
| - | [* orange] The two screws holding down the wire will also need to be removed. |
| + | [* orange] The two 1mm Phillips screws holding down the wire will also need to be removed. |
| [* black] Once the wires are exposed separate and fold to opposite sides. | |
| [* icon_note] A Phillips head screwdriver will be required to remove screws. |