Alterações no passo nº 1
Edição por Sarah Westberg —
Edição aprovada por Sarah Westberg
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Place the scooter sideways, flat on the ground. |
|---|---|
| - | [* black] Place the 5mm Hex Key into the nail, while the AWS-11 Fold-Up Hex Wrench Set: 5mm key holds the other side. |
| - | [* icon_note] ***Optional: ***You can do this operation with two 5mm hex keys. I have the AWS-11 Fold-Up Hex Wrench Set because it had a 5mm key as an option. |
| - | [* icon_note] ***Optional:*** You can have an object less than or equal to 5 inches in height to provide space during the process. |
| - | [* black] Turn Counter-Clockwise to unscrew the screw with the 5mm Hex Key. |
| - | [* black] Remove the nail from the scooter frame. |
| + | [* black] Place the scooter on its side and on the ground. |
| + | [* black] Place the 5 mm Hex Security key into the screw, and secure the other side of the screw with another 5 mm Hex Security key to keep it from spinning around. |
| + | [* black] Remove the screw using the 5 mm Hex Security key. |
| + | [* black] Remove the screw from the scooter frame. |