Alterações no passo nº 1
Edição por Alexander Vazquez —
Edição aprovada por Alexander Vazquez
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Place the scooter sideways, flat on the ground |
|---|---|
| + | [* black] Place the scooter sideways, flat on the ground. |
| [* black] Put the 5mm Hex Key into the nail and do the same for the other side with the Park Tool AWS-11 Fold-Up Hex Wrench Set. | |
| - | [* black] Turn Counter-Clockwise to unscrew the screw. |
| + | [* black] Turn Counter-Clockwise to unscrew the screw with the 5mm Hex Key. |
| [* black] Remove the nail from the scooter frame. | |
| [* icon_note] To stabilize the scooter in place, you can also use your hand or an object. |