Conserte seus objetos Comunidade Loja

Alterações no passo nº 3

Edição por Devyn White —

Edição aprovada por Devyn White

Antes
Depois
Sem alteração

Linhas do passo

[* black] Turn the device around, so that the back end is facing you.
-[* black] Locate the cylindrical connectors from the Top Door to the device. You will want to look for the small rectangles along the backside of the device. For every two rectangles, there is one cylindrical connector in between the two.
-[* black] To remove the Top Door, wedge one or two iFixit opening picks within the seam connecting the Top Door to the device, and use the iFixit opening tool to pry in an upwards motion along the seam. These actions should reveal the cylindrical connectors.
+[* black] Look for the small rectangles along the backside of the device. For every two rectangles, there is one cylindrical connector in between the two.
+[* black] Wedge one or two iFixit opening picks within the seam connecting the Top Door to the device, and use the iFixit opening tool to pry in an upwards motion along the seam. These actions should reveal the cylindrical connectors.
[* black] Press down on the Top Door, and push outwards, to free it from the jointed clasps.
[* black] To install the new door onto the device, complete each of the three total steps listed in this Wiki, in reverse.