Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #4

Edição por Walter Galan —

Edição aprovada por Walter Galan

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Removeicon_reminder] Vertically turn the last 4.9 mm T8 Torx screw securingcomputer over so the bottom display to the upper case.
[* red] While holding the Air steady, remove the remaining 4.9 mm T8 Torx screw from the lower display bracketis now easily accesible.
[* black] Removeicon_reminder] Vertically turn the last 4.9 mm T8 Torx screw securingcomputer over so the bottom display to the upper case.
[* red] While holding the Air steady, remove the remaining 4.9 mm T8 Torx screw from the lower display bracketis now easily accesible.
[* icon_note] Before removing the last display screw, be sure to hold the display and upper case steady with your other hand. Failure to do so may allow the components to fall onto the table, causing potentially expensive damage.
[* red] Remove the last 4.9 mm T8 Torx screw securing the display to the upper case.