Ir para o conteúdo principal

Alterações no passo #4

Edição por Walter Galan

Edição aprovada de Walter Galan

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* red] While holdingicon_reminder] Vertically turn the Air steady, removecomputer over so the remaining 4.9 mm T8 Torxbottom display screw from the lower display bracketis now easily accesible.
[* red] While holdingicon_reminder] Vertically turn the Air steady, removecomputer over so the remaining 4.9 mm T8 Torxbottom display screw from the lower display bracketis now easily accesible.
[* icon_note] Before removing the last display screw, be sure to hold the display and upper case steady with your other hand. Failure to do so may allow the components to fall onto the table, causing potentially expensive damage.
[* orangered] Remove the last 4.9 mm T8 Torx screw securing the display to the upper case.
[* orangered] Remove the last 4.9 mm T8 Torx screw securing the display to the upper case.

Imagem 2

Excluído