Alterações no passo nº 5
Edição por Devyn White —
Edição aprovada por Devyn White
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Remove the six body screws using a Phillips1 screw head. |
|---|---|
| - | [* red] Four of the screws will be 10mm, they will be located Parallel to one another, on either side of the motor (highlighted in yellow) |
| - | [* orange] The other two screws will be 22mm. |
| + | [* red] Remove four 10mm screws, using a Ph1 screw head. |
| + | [* orange] Remove the other two 22mm screws using the Ph1 screw head. |
| [* black] These screws will be located on the sides of the device, next to the motors. |