Alterações no passo nº 22
Edição por Chayton Ritter —
Edição aprovada por Chayton Ritter
- Antes
- Depois
- Sem alteração
Linhas do passo
| [title] Separate the display from the frame | |
| [* black] Grab two opposing corners of the display and gently separate the rest of the adhesive. | |
| [* icon_caution] Do not fully remove the display as it is held in place by several ribbon cables underneath. | |
| - | [* red] Shift the display towards the bottom |
| + | [* red] Shift the display towards the bottom right corner of the frame until the ambient light sensor ribbon cable near the top edge is uncovered. |