Alterações no passo nº 6
Edição por Chayton Ritter —
Edição aprovada por Chayton Ritter
- Antes
- Depois
- Sem alteração
Linhas do passo
| [title] Insert an opening pick | |
| [* icon_note] If your display is badly cracked, [guide|140533|covering it with a layer of clear packing tape|new_window=true] may allow the suction cup to adhere. Alternatively, very strong tape may be used instead of the suction cup. If all else fails, you can superglue the suction cup to the broken display. | |
| - | [* black] Apply a suction handle to the right edge of the display, about 50 mm (2 in) from the bottom |
| + | [* black] Apply a suction handle to the right edge of the display, about 50 mm (2 in) from the bottom edge. |
| [* black] Pull up on the suction handle with firm, constant pressure to create a gap just small enough to insert an opening pick. | |
| [* icon_caution] Only create a gap small enough to insert an opening pick. Overbending the display will damage it. | |
| [* black] Insert the tip of an opening pick into the gap. | |
| [* icon_caution] Do not insert the opening pick more than 5 mm or the LCD may be damaged. |