Alterações no passo nº 6
Edição por Chayton Ritter —
Edição aprovada por Chayton Ritter
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* icon_note] If your display is badly cracked, [guide|140533|covering it with a layer of clear packing tape|new_window=true] may allow the suction cup to adhere. Alternatively, very strong tape may be used instead of the suction cup. If all else fails, you can superglue the suction cup to the broken screen. | |
| [* black] Apply a suction handle to the bottom right edge of the screen. Slightly above the SIM Slot on cellular models. | |
| - | [* black] Pull up on the suction cup with firm, constant pressure to create a small gap of about 3 mm between the screen and the frame. |
| - | [* icon_caution] Do not flex or bend the screen ++ |
| + | [* black] Pull up on the suction cup with firm, constant pressure to create a small gap of about 2 mm (0.06 in) between the screen and the frame. |
| [* black] Insert the tip of an opening pick into the gap. | |
| - | [* icon_caution] |
| + | [* icon_caution] Do not insert the opening pick more than 5 mm (0.2 in). |