Alterações no passo nº 1
Edição por Chayton Ritter —
Edição aprovada por Chayton Ritter
- Antes
- Depois
- Sem alteração
Linhas do passo
| [title] Display removal information | |
| [* icon_note] While your iPad looks uniform from the outside, there are delicate components under certain portions of the display. To avoid damage, note the following areas and follow each step closely: | |
| [* red] Use extreme caution and ***follow the instructions exactly as written*** when slicing the adhesive along the top edge. The camera module, LiDAR sensor, and ambient light sensors are easily damaged if the procedure is not followed carefully. | |
| [* orange] Use extreme caution and ***follow the instructions exactly as written*** when slicing the adhesive along the left edge. There are several fragile display cables that are easily damaged if the procedure is not followed carefully. | |
| - | [* yellow] Do not insert an opening pick more than 2 mm |
| - | [* green] Do not insert an opening pick more than 5 mm |
| + | [* yellow] Do not insert an opening pick more than 2 mm when slicing the top and bottom parts of the right edge. |
| + | [* green] Do not insert an opening pick more than 5 mm on the bottom and middle right edges when slicing the adhesive. |