Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Alterações no passo #4

Edição por Andrew Bookholt

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

[* icon_note] This step is only required if you have an anti-glare display. If you have a glossy display, skip to step this step.
[* icon_note] This step is only required if you have an anti-glare display. If you have a glossy display, skip to step this step.
[* black] Disconnect the Bluetooth cable by pulling the male end straight away from its socket.
[* icon_caution] Pull the connector parallel to the face of the logic board, not straight up.
[* black] Use the flat end of a spudger to pry the Bluetooth antenna cable from its socket on the board.