Conserte seus objetos Comunidade Loja

Alterações no passo nº 2

Edição por Manuel Haeussermann —

Edição aprovada por Manuel Haeussermann

Antes
Depois
Sem alteração

Linhas do passo

[title] Insert an opening pick
-[* black] Apply a suction handle to the back of the phone, as close to the heated right edge as possible.
- [* icon_note] If the rear glass is cracked, the suction handle may not stick. Try lifting it with strong tape, or superglue the suction handle in place and allow it to cure so you can proceed.
+[* black] Apply a suction handle to the right edge of the rear glass.
+ [* icon_note] If the back cover is cracked, the suction handle may not stick. Try [https://d3nevzfk7ii3be.cloudfront.net/igi/4MmKE22Cy2MavVZU|lifting it with strong tape|new_window=true], or superglue the suction handle in place and allow it to cure so you can proceed.
[* black] Pull on the suction handle to create a gap between the rear glass and the frame.
[* black] Insert an opening pick into the gap.