Alterações no passo nº 4
Edição por Sarah Westberg —
Edição aprovada por Sarah Westberg
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* red] Using a small plastic spudger, pry off the four clips in each corner holding the motherboard in. |
|---|---|
| - | [* icon_caution] Once the motherboard has been released from the clips, carefully remove the board out of the case as to not damage it. |
| + | [* red] Using a small plastic spudger, release the four clips from each corner of the board. |
| + | [* black] Gently remove the board out of the case. |
| + | [* icon_caution] Don't yank or pull the board off the case. There is one cable connecting the board to the case. |