Ir para o conteúdo principal

Alterações no passo nº 1

Edição por Nam Nguyen

Edição aprovada por Nam Nguyen

Antes
Depois
Sem alteração

Linhas do passo

-[* black] Locate and remove the feet of the mouse on the underside
-[* red] Remove both screws using a 1.4mm flat head screwdriver
+[* black] Flip the mouse over and peel off the two feet at the bottom of the mouse
+[* red] Using a screws using a 1.4mm flat head screwdriver unscrew and remove both half inch
[* icon_caution] Carefully split the mouse in two