Alterações no passo nº 3
Edição por Chayton Ritter —
Edição aprovada por Chayton Ritter
- Antes
- Depois
- Sem alteração
Linhas do passo
| [title] Apply isopropyl alcohol | |
| - | [* icon_note] If you removed all of the stretch-release adhesive, good job! You can skip |
| + | [* icon_note] If you removed all of the stretch-release adhesive, good job! You can skip the next four steps. If not, then follow the next four steps to apply isopropyl alcohol. |
| [* black] Prop the left side of the iPad up against an object so the isopropyl alcohol can flow under the right battery cell. | |
| [* black] Apply high-strength (>90%) isopropyl alcohol along the inside edge of the right battery cell. | |
| [* icon_caution] Be careful if you're using a syringe with a needle or other sharp instrument to dispense isopropyl alcohol—a punctured or bent battery may leak dangerous chemicals or cause a fire. | |
| [* black] Let the alcohol soak for two minutes to soften the adhesive under the battery cell. |