Alterações no passo nº 25
Edição por Chayton Ritter —
Edição aprovada por Chayton Ritter
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Use an opening pick to gently pry up the top right branch of the |
|---|---|
| - | [* icon_note] If the adhesive is still too strong to lift up the |
| + | [* black] Use an opening pick to gently pry up the top right branch of the logic board near the rear camera lenses. |
| + | [* icon_note] If the adhesive is still too strong to lift up the logic board, apply some additional isopropyl alcohol and wait one minute. |