Alterações no passo nº 26
Edição por Chayton Ritter —
Edição aprovada por Chayton Ritter
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Insert an opening pick between the right edge of the |
|---|---|
| - | [* black] Gently pry up the right side of the |
| + | [* black] Insert an opening pick between the right edge of the logic loard and the frame, making sure to stay above the left microphone and Wi-Fi antenna cables. |
| + | [* black] Gently pry up the right side of the logic board. |
| [* icon_caution] Don't forcefully lever against the battery—a punctured or bent battery may leak dangerous chemicals or cause a fire. | |
| - | [* icon_note] If the adhesive is still too strong to pry up the |
| + | [* icon_note] If the adhesive is still too strong to pry up the logic board, apply some additional solvent and give it time to penetrate. |