Alterações no passo nº 23
Edição por Chayton Ritter —
Edição aprovada por Chayton Ritter
- Antes
- Depois
- Sem alteração
Linhas do passo
| [title] Pry up the bottom | |
| [* black] Insert the flat end of a spudger between the logic board and the bottom interconnect board. | |
| - | [* icon_caution] Don't pry against the bottom interconnect board as this |
| + | [* icon_caution] Don't pry against the bottom interconnect board as this will damage it. |
| [* black] Slowly lift up the bottom of the logic board. | |
| [* icon_note] If the adhesive is still too strong to lift up the logic board, apply some additional isopropyl alcohol and wait one minute. | |
| [* black] Lift up the logic board and replace the playing card battery blocker with an opening pick. |