Alterações no passo nº 23
Edição por Chayton Ritter —
Edição aprovada por Chayton Ritter
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Insert the flat end of your spudger between the Logic Board and the bottom interconnect board. | |
| [* icon_caution] Do not pry against the bottom interconnect board as this could damage it. | |
| - | [* black] Use your spudger to slowly |
| + | [* black] Use your spudger to slowly lift up the bottom of the Logic Board. |
| [* icon_note] If the adhesive is still too strong to pry up the Logic Board, apply some additional isopropyl alcohol and wait one minute. | |
| [* black] Lift up the Logic Board and replace the playing card battery blocker with an opening pick. |