Conserte seus objetos Comunidade Loja

Alterações no passo nº 20

Edição por Chayton Ritter —

Edição aprovada por Chayton Ritter

Antes
Depois
Sem alteração

Linhas do passo

-[title] Remove the Logic Board
-[* icon_note] The adhesive that holds down the logic board is very strong. To remove the board, you must first weaken the adhesive using high-strength (>90%) isopropyl alcohol.
+[title] Apply isopropyl alcohol
+[* icon_note] The adhesive that secures the logic board is very strong. To remove the board, you must first weaken the adhesive using high-strength (>90%) isopropyl alcohol.
[* black] Elevate the left side of the iPad so that it lays down at an angle.
-[* black] Apply some isopropyl alcohol in a seamless movement along the left edge of the logic board. Allow it to penetrate the adhesive for one minute.
+[* black] Apply isopropyl alcohol along the left edge of the logic board.
+[* black] Allow it to penetrate the adhesive for one minute.