Alterações no passo nº 20
Edição por Chayton Ritter —
Edição aprovada por Chayton Ritter
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [title] |
|---|---|
| - | [* icon_note] The adhesive that holds down the logic board is very strong. To remove the board, you must first weaken the adhesive using |
| + | [title] Remove the Logic Board |
| + | [* icon_note] The adhesive that holds down the logic board is very strong. To remove the board, you must first weaken the adhesive using high-strength (>90%) isopropyl alcohol. |
| [* black] Elevate the left side of the iPad so that it lays down at an angle. | |
| - | [* black] Apply some |
| + | [* black] Apply some high-strength (>90%) isopropyl alcohol in a seamless movement along the left edge of the logic board. Allow it to penetrate the adhesive for one minute. |