Alterações no passo nº 13
Edição por Chayton Ritter —
Edição aprovada por Chayton Ritter
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Use the flat end of your spudger to disconnect the LiDAR sensor ribbon cable. |
|---|---|
| - | [* black] Bend the LiDAR sensor ribbon cable away from the frame to access the press connectors underneath. |
| + | [title] Disconnect the LiDAR sensor cable |
| + | [* black] Use the flat end of a spudger to disconnect the LiDAR sensor ribbon cable. |
| + | [* black] Bend the LiDAR sensor ribbon cable away from the chassis to access the press connectors underneath. |
| + | [* icon_caution] Only bend the cable enough to access the connector underneath. |